特性：＊PLC計算機控制、操作簡單，功能變化大、故障率低、維護容易。＊儲料系統：自動化控溫裝置，加硫時間縮短、產量增加、節省化學藥量，降低成本、儲料完成后，噴嘴會自動離開，不會造成死料，堵塞出口。＊射出系統：采直壓射出（三段壓力，四段流量控制）穩定、速度快、適用于任何硬度材質，射出量由電位計量器控制，射出量準確穩定，適合大量生產。＊適用于各種天然橡膠、耐油、耐熱、耐酸蝕性及再生橡膠等制品，是橡膠業自動化生產利器。Special Features：＊PLC Computer Control. Easy operation. Wide variety of function. Low failure rate. Simple maintenance.＊Depositing Material System: with automatic temperature control device. Shorter curing time. High production Capacity. Saving raw materials. Lowering production cost. The nozzle can leave automatically without leaving excess material to avold blocking the outlet.＊Injection System: Adopting the direct pressure injection (3-step pressure and 4-step flow control). Stable, quick and applicable to any kind of hard material. The injection amount is controlled by the electric potential meter. Accurate injection amount. Good for mass production.＊For applying to every kind of natural rubber including reclaimed rubber, oil resisting, heat resisting and acid resisting products. This is the best machine for the rubber automatic production industry.